欢迎来到启研生物[ 会员登录 ] [ 立即注册 ]
400-812-0026

购物车0

您购物车为空,赶紧选购吧!
96孔PCR板磁力架-F型 适配无裙边的PCR板( 替代DynaMag-96 )
96孔PCR板磁力架-F型 适配无裙边的PCR板( 替代DynaMag-96 )
96孔PCR板磁力架-F型 适配无裙边的PCR板( 替代DynaMag-96 )
市场价格
经销商客户: ¥1540.0
实验室客户: ¥2100.0
近期销售量9 用户评价:comment rank 5()
文件与质量管理
浏览历史 [清空]

商品描述

商品属性

96孔PCR板磁力架--F型

Cat. QY096F

产品描述:

启研PCR板磁力架用于磁珠法分离样品。磁珠可用于分离细胞,蛋白,核酸,或其他生物样品。F型可兼容各种形式的200ul 96孔PCR板以及8联排管和单管,单侧吸附磁珠。首先将磁珠与样品以适当的比例在深孔板中混合。数分钟内,磁珠即可与样品中目的分子或细胞结合。之后将深孔板放置在架子上,在磁力作用下,与磁珠结合的目的分子或细胞可随磁珠吸附在管壁上。弃上清,即可获得纯化的目标分子或细胞。当外加磁场移除后,磁珠即分散,不会残留磁性。启研磁力架可用于任何种类的磁珠分离。

 

产品特色:

F型采取了上半部分透光板,方便观察磁珠,下半部分合金板,坚固耐用的结构设计。采用与DynaMag™-96一致的长条型强磁,每磁体吸附临近的2排孔,单侧吸附。

规格:200ul 96孔PCR板,8联排管或单管。

工作体积:30-200ul。

体积小巧,操作简单,适合高通量样品的有效磁珠分离。可同时分离96个样品。

室温储存。-20℃-70℃之间保持性能稳定。

每块磁铁可提供2800g的垂直拉力,表磁大于3900gs。

 

清洁与消毒:

可用75%酒精或1%次氯酸钠消毒。消毒后及时擦干。不可浸泡于水或其他有机溶剂中。

提示:请勿高压。

 

保存与稳定性:

磁力架包含强力钕磁铁部件,其磁性可维持终身不会消退。建议保存于凉爽、干燥环境,避免生锈。请勿在超过70℃(122℉)的环境下使用。避免暴露于外加磁场下。避免日光或紫外灯直射,因UV会使其表面变脆弱。

 

警告:

磁力架包含强磁场。佩戴心脏起搏器或其他医疗磁场装置者请勿使用。

 

 

Quayad(启研)Magnetic Separator Rack of PCR 96-well plates(F-type)

Cat. QYM96F

●Holds: 200μl PCR 96-well plates; 0.2ml PCR tubes or 8×0.2ml PCR tubes

●Working volume:30-200μl.

●The Magnetic Separator Rack is small in size and easy to handle, which is suitable for effective magnetic bead separation of high-throughput samples. The Rack can take up to 96 samples at the same time.

●Store at ambient temperature,and temperature range that can be subjected to -20-70°C.

●Magnetic bead suction 2800g, Surface gauss greater than 3900 gs.

 

Product Description

The Magnetic Separator Rack of PCR 96-well plate(F-type) adopts the upper half of the light transmitter plate, which is convenient to observe the magnetic bead, and the lower half of the alloy plate, which is a strong and durable structural design. Using the same strong magnetic strip with DynaMag™-96, each magnet adsorption adjacent 2 rows of holes, one-sided adsorption.

The Magnetic Separator Rack was used to separate samples by magnetic bead method. The magnetic beads can be used to isolate cells, proteins, nucleic acids or other biomolecules. The magnetic beads are mixed with the sample in the proper ratio in the deep-well plate, and usually bind to the target biomolecules within a few minutes. The deep-well plate is placed on the shelf, and the target molecule or cell combined with the magnetic bead can be adsorbed on the tube wall with the magnetic bead under the action of magnetic force. Discard the supernatant and obtain the target molecule or cell captured by the magnetic bead. After repeated adsorption and elution, the target biological samples can be separated and purified. When the magnetic field is removed, the magnetic beads are dispersed and no residual magnetism. These magnets can be used with all types of magnetic beads.

 

Precautions

These magnets contain very strong permanent magnets. People wearing a pacemaker or any other medical magnetized implant should not use this product unless advised by a health professional; the implant could be affected or damaged by exposure to a strong magnetic field. Keep tools and objects that could be damaged by the magnetic field out of the working area. This includes, but is not restricted to, credit cards and other products containing magnetic recording devices. Keep away from delicate instruments, watches, electronic equipment, displays and monitors. The magnet may attract steel or other magnetic material with high mechanical forces. Take care during handling. Avoid contact between two magnets. Do not pull the magnets apart if contact has been made; twist off to prevent damage to the unit or fingers.

 

Cleaning and Disinfection

The following materials are recommended for cleaning purposes. Spray and/or wipe the magnetic rack either with 70% alcohol, or 1% sodium hypochlorite solution (bleach). Dry promptly after disinfection. Do not submerge in aqueous solutions and avoid prolonged exposure to water orother organic solvents.

 

Note: Do not autoclave the magnetic.

 

Storage and stability

The magnets contain high-energy Neodymium permanent magnets, and the magnetic strength will not diminish significantly during the lifetime of the product. Do not use the magnets above 70°C (122°F) and store in a cool, dry environment. Avoid prolonged exposure of the magnets to direct sunlight or artificial UV light as the surface material may become brittle.

 

 

广告说明